RC-Monster Forums - View Single Post

MetalMan · 10.09.2006, 09:50 AM

Just FYI, you might need a larger pinion than a 14, depending on the diff ratio. I was planning to use 18/46 on my buggy with 4s Lipo and a Neu 1512 2.5D, and the diff ratio is 3.31:1.

A pair of 2s 8000mah packs wouldn't make it too heavy. You might need a bit more shock preload, but it would still be able to push itself just fine.

	(#2)
MetalMan RC-Monster Mod Offline Posts: 5,297 Join Date: Mar 2005 Location: SoCal	10.09.2006, 09:50 AM Just FYI, you might need a larger pinion than a 14, depending on the diff ratio. I was planning to use 18/46 on my buggy with 4s Lipo and a Neu 1512 2.5D, and the diff ratio is 3.31:1. A pair of 2s 8000mah packs wouldn't make it too heavy. You might need a bit more shock preload, but it would still be able to push itself just fine. SH Z-Car, Custom Crawler, 8s Savage, 12s XTM XLB 1/7 buggy, 4wd 4-link rear/IFS Pro4 truck, Custom Hyper 10 Short Course, Belt-Drive Mammoth ST 1/8 truggy, 4s 17.5 MM Pro HPI Blitz