Quote:
|
Originally Posted by psycho
Hi everybody.
In my area all that have wheels is drag raced, so I am planning on building a Mamba Max 2wd stadium truck to drag against the local nitro ones. I found that there a lot of aluminum parts for the Rustler drive train, so it looks promising. What are your recommendations for a good platform and hop up parts to cope with a 3s lipo 5700 Mamba Max power on drag racing?
Thanks:037:
|
what ever bushless setup you choose...
To answer your question of what will you need platform and hopup wise.
The Rustler definitely has the most potential to bullet proof. This is what you would need to make the drive train as strong as it possible can be.
Well there are a few things that are ABSOLUTE MUSTS:
1) CVD's (MIP are good)
http://www.rc-monster.com/proddetail...MIP1219&cat=29
2) Aluminum Idler for Tranny
http://www.buytraxxas.com/product_in...roducts_id=342
3) RPM Wheel Hubs w/ Bearings.
http://www2.towerhobbies.com/cgi-bin...&I=LXNY90&P=ML
http://www2.towerhobbies.com/cgi-bin...&I=LXNY89&P=ML
Highly recommended(maybe even necessary depending on the power):
1) Aluminum tranny case
http://www.rc-monster.com/proddetail...ltranny&cat=29
2) Steel/Alum Diff*
http://www.rc-monster.com/proddetail...edediff&cat=29
I think this list will pretty much make the drive train as bulletproof as possible. The RPM wheel hubs and bearing should be done anyway.