RC-Monster Forums - View Single Post

VintageMA · 10.19.2006, 01:18 PM

If you are referring to the Century motor gears from Tower, I would recommend against them. They are not that 'hardened' - I have gone through a 14T gear in about 45 minutes of driving.

I hate to mention the name here, but CF of FD uses a true hardened Mod1 clutchbell with a 5mm mount epoxied in place that may add just a little weight at the motor, but I have been running one in a Kyosho MP7.5 conversion with a metal spur with no problems.

	(#13)
VintageMA RC-Monster Aluminum Offline Posts: 660 Join Date: Sep 2006 Location: CT	10.19.2006, 01:18 PM If you are referring to the Century motor gears from Tower, I would recommend against them. They are not that 'hardened' - I have gone through a 14T gear in about 45 minutes of driving. I hate to mention the name here, but CF of FD uses a true hardened Mod1 clutchbell with a 5mm mount epoxied in place that may add just a little weight at the motor, but I have been running one in a Kyosho MP7.5 conversion with a metal spur with no problems. “Everyone has a right to be stupid; some people just abuse the privilege.”