RC-Monster Forums - View Single Post - E-Maxx Setup

mwe-maxxowner · 03:14 AM

All you need to run the hv system is upgraded driveshafts (either 3.3's or cvds) and steel idlers, and I don't believe the idlers are necessary for the 6.5 system. I got away with stock shafts and idlers on my hv e-maxx for 6 months before I snapped a shaft, and my stock idlers still haven't given any trouble. I was running the 4400, which has virtually the same power output as the new 6.5 system, only the 6.5 runs a little cooler due to the better rotor.

	(#6)
mwe-maxxowner RC-Monster Carbon Fiber Offline Posts: 175 Join Date: Oct 2006	10.21.2006, 03:00 AM All you need to run the hv system is upgraded driveshafts (either 3.3's or cvds) and steel idlers, and I don't believe the idlers are necessary for the 6.5 system. I got away with stock shafts and idlers on my hv e-maxx for 6 months before I snapped a shaft, and my stock idlers still haven't given any trouble. I was running the 4400, which has virtually the same power output as the new 6.5 system, only the 6.5 runs a little cooler due to the better rotor. Brushless-taking back rc! E-revo is DONE! Last edited by mwe-maxxowner; 10.21.2006 at 03:14 AM.