|
10.23.2006, 07:53 PM
Center shafts are a little too long. You have to cut them down about 1/2". You also have to grind some of the chassis right by the tranny to clear the thincker shaft. I'm running them right now. They are much beefier than stock.
Mine:
2007 Grizzly 700 EPS EFI
Sons:
BL E-Maxx
4S MA 4000 Lipo/MM ESC
Feigao 9XL 22/54 gearing
Gmaxx single speed
Brushless Revo under construction
|