RC-Monster Forums - View Single Post - Two Videos of my G2R

BP-Revo · **Two Videos of my G2R - Output shaft breaks at the end -** 10.24.2006, 10:22 PM

Both vids are of me driving around in front of my house.

First vid is of the last 4 minutes or so of my run, taken Monday afternoon. The packs dumped right after I turned the camera off (literally). I was using stock Talon tires off my Revo 2.5R, so I had horrible traction and handling. Camera was first placed on a curb and then moved to the trunk top of an G35 Coupe parked on my driveway lol.

Here is the first vid.

Second vid is the first 4 minutes of a run, taken this afternoon after recharging my packs. Right before the vid ends you will see 1/2 a wheelie and then hear a bunch of clicking. That was my output shaft going bye bye. Tires were CrimeFighter MTs. The camera was placed on the hood of a Dodge Ram parallel parked in front of my house lol (at least my tripods are stable :005: ).

Here is video number two

And here is picture of the broken ligthweight output shaft.

[URL=http://img93.imageshack.us/my.php?image=brokenshaftmq0.jpg][IMG]

Here is some general info.

First run was 12 minutes (second run cut short by breakage).

Motor Temp was about 85 degrees in both runs, with a high of 90.

Run was in 2nd gear 95% of the time.

Comments welcome - Enjoy! :018:

	(#1)
BP-Revo BMW M Power! Offline Posts: 1,910 Join Date: Jan 2006 Location: SoCal	Two Videos of my G2R - Output shaft breaks at the end - 10.24.2006, 10:22 PM Both vids are of me driving around in front of my house. First vid is of the *last* 4 minutes or so of my run, taken Monday afternoon. The packs dumped right after I turned the camera off (literally). I was using stock Talon tires off my Revo 2.5R, so I had horrible traction and handling. Camera was first placed on a curb and then moved to the trunk top of an G35 Coupe parked on my driveway lol. Here is the first vid. Second vid is the first 4 minutes of a run, taken this afternoon after recharging my packs. Right before the vid ends you will see 1/2 a wheelie and then hear a bunch of clicking. That was my output shaft going bye bye. Tires were CrimeFighter MTs. The camera was placed on the hood of a Dodge Ram parallel parked in front of my house lol (at least my tripods are stable :005: ). Here is video number two And here is picture of the broken ligthweight output shaft. [URL=http://img93.imageshack.us/my.php?image=brokenshaftmq0.jpg][IMG] Here is some general info. First run was 12 minutes (second run cut short by breakage). Motor Temp was about 85 degrees in both runs, with a high of 90. Run was in 2nd gear 95% of the time. Comments welcome - Enjoy! :018: BL Revo: CF G2R, LMT1940/7, 6S FP 30C Lipos, MMM, Hitec 5955TG CRT .5: 7075 Ext Chassis, LMT1930/7, FP 25C 3S Lipos, MM