RC-Monster Forums - View Single Post - On-road BL project

BrianG · 11.03.2006, 12:19 PM

Actually, I was talking about the RPM arms. :)

The RPM stuff is thicker and the rear inside rim would rub on the cap screw. Even with a grub screw, there is very little clearance between the axle hub and the rim...

	(#134)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	11.03.2006, 12:19 PM Actually, I was talking about the RPM arms. :) The RPM stuff is thicker and the rear inside rim would rub on the cap screw. Even with a grub screw, there is very little clearance between the axle hub and the rim...