RC-Monster Forums - View Single Post

RC-Monster Mike · 05.21.2005, 10:14 AM

looks like you found the solution before I found the post(batteries). While I don't agree that the 6s "sucks" in most applications, there are certainly motors that will be better matched to this application. I run a similar setup in my tc3 (11.1 volt lipo with 4200Kv motor). I like the basic motors (most smaller motors work extremely well in these applications, as Lipomaxx said). For the record, I wouldn't run the 6s on 14.8 LiPos and tall gearing unless you have a lot of room and a serious controller. Also, be prepared to rebuild/replace some parts!

	(#6)
RC-Monster Mike Site Owner Offline Posts: 4,915 Join Date: Nov 2004 Location: PA	05.21.2005, 10:14 AM looks like you found the solution before I found the post(batteries). While I don't agree that the 6s "sucks" in most applications, there are certainly motors that will be better matched to this application. I run a similar setup in my tc3 (11.1 volt lipo with 4200Kv motor). I like the basic motors (most smaller motors work extremely well in these applications, as Lipomaxx said). For the record, I wouldn't run the 6s on 14.8 LiPos and tall gearing unless you have a lot of room and a serious controller. Also, be prepared to rebuild/replace some parts!