RC-Monster Forums - View Single Post

aqwut · 11.22.2006, 01:15 PM

yeah, I think the gears are dead....
Serum, I used UE 8 spyders for the front and rear... it's only rear wheel drive right now... For the center diff, I used Ofna LX Pro... I tightened up that set screw thing all the way... but I think I stripped something.. I"m not too familiar with center diffs... You guys know any other way to lock the center diff... would it being filled with JB weld work?... cuz I dont' really want to get a center drive system off of an ofna dominator... I already have the holes perfectly drilled our for this....

Thanks for the tipps.. for the wheels, hexes I'm using RPMS beadlock and still 15mm hubs... its seems to hold up pretty good.. I'm also using the wheel widener, I bought a long time ago.... I'm not too worried about the front and rear diffs because I'm using the stock sized tires... puts less stress than a bigger tire... I know rcalloys doesn't recommend it, but I will build 2 extra supports for the shaft and mount in on the center of the chassis... so it will be no flex... I will used UHMW... thanks for the advice... I just need to know how to loock the center diff now.. Thanks..

	(#13)
aqwut Brushless Heavy Weight.... Offline Posts: 1,954 Join Date: Sep 2005 Location: Kingsville, Ontario	11.22.2006, 01:15 PM yeah, I think the gears are dead.... Serum, I used UE 8 spyders for the front and rear... it's only rear wheel drive right now... For the center diff, I used Ofna LX Pro... I tightened up that set screw thing all the way... but I think I stripped something.. I"m not too familiar with center diffs... You guys know any other way to lock the center diff... would it being filled with JB weld work?... cuz I dont' really want to get a center drive system off of an ofna dominator... I already have the holes perfectly drilled our for this.... Thanks for the tipps.. for the wheels, hexes I'm using RPMS beadlock and still 15mm hubs... its seems to hold up pretty good.. I'm also using the wheel widener, I bought a long time ago.... I'm not too worried about the front and rear diffs because I'm using the stock sized tires... puts less stress than a bigger tire... I know rcalloys doesn't recommend it, but I will build 2 extra supports for the shaft and mount in on the center of the chassis... so it will be no flex... I will used UHMW... thanks for the advice... I just need to know how to loock the center diff now.. Thanks.. The Power of BRUSHLESS!!!!! http://www.geocities.com/aqwut 1HP (electric) = 746 Watts. Everything is brushless!!