RC-Monster Forums - View Single Post

danverz · 12.02.2006, 01:41 PM

Hi,
I think yes, you need at least for 3 reasons:

- using an external BEC helps your controller to get not hot
- that servo you are using can peak over 3.5 Ampere and this is a lot for an internal ESC Bec
- using an external bec means you will have a lot less spurious current coming from
the Esc and going to the receiver ... this usually means less interference.

Ciao,
Daniele

	(#2)
danverz RC-Monster Carbon Fiber Offline Posts: 85 Join Date: Jun 2006	12.02.2006, 01:41 PM Hi, I think yes, you need at least for 3 reasons: - using an external BEC helps your controller to get not hot - that servo you are using can peak over 3.5 Ampere and this is a lot for an internal ESC Bec - using an external bec means you will have a lot less spurious current coming from the Esc and going to the receiver ... this usually means less interference. Ciao, Daniele