RC-Monster Forums - View Single Post

BrianG · 12.06.2006, 06:26 PM

Newe: If you already have resistors on there, it's probably enough. You generallay want to draw about 1A or a tad more. Just be sure you size them appropriately to take the heat!

Well, now that I know the LBA10 will balance the M1's OK, I really don't need another balancer. Whatever charger I get will have a high cell count capability (10s), high current charge (~10A), able to have an adjustable peak v (for any future chemistries), and higher power limit (preferably about 400w).

	(#6)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	12.06.2006, 06:26 PM Newe: If you already have resistors on there, it's probably enough. You generallay want to draw about 1A or a tad more. Just be sure you size them appropriately to take the heat! Well, now that I know the LBA10 will balance the M1's OK, I really don't need another balancer. Whatever charger I get will have a high cell count capability (10s), high current charge (~10A), able to have an adjustable peak v (for any future chemistries), and higher power limit (preferably about 400w).