[JEFFRO503]

OK..so i go with a Qaurk 125 esc , and if i run 3-5S lipo's. If i'm looking for a motor that will get me really good low end torque for the tight , smaller type tracks ( 25-35mph 3-4S lipo ) and then can gear it up a little or add another cell (4-5S) for some larger tracks with a speed of between 40-45 mph , plus a little more , what am i to look for? Something mid-range out of the group listed below? i have no idea what to look for. just looking for an all around good motor that will work well on both type tracks for an 1/8yh scale.

keep in mind , that i'm wanting to build something similar for an 1/8th scale truggy too........will the same system work in both?

thanks guys!!

NEU 1515/1.5D 2700Kv
NEU 1515/1Y 2200Kv
NEU 1515/2.5D 1700Kv
NEU 1512/2y 1400Kv
NEU 1512/2D 2600Kv
NEU 1512/2D 2000Kv


lehner 1940/6 Motor LMT RPM per Volt 2613,
lehner 1940/7 Motor LMT RPM per Volt 2239,
lehner 1940/8 Motor LMT RPM per Volt 1959,
lehner 1940/9 Motor LMT RPM per Volt 1742



JEFF