RC-Monster Forums - View Single Post

RC-Monster Mike · 06.07.2005, 07:21 PM

The drawing on the left is incorrect (one of the batteries has two red wires and the other has two black wires). Basically, for a series connection, wire as follows:

Connect the two RED battery leads from the controller to the POSITIVE side of a male dean's connector.

Connect the two BLACK battery leads from the controller to the NEGATIVE side of ANOTHER male dean's connector.

Then, connect the two attcahed dean's connectors to each other with another wire(positive to negative).

When you plug in the batteries, they will be wired in series.

	(#7)
RC-Monster Mike Site Owner Offline Posts: 4,915 Join Date: Nov 2004 Location: PA	06.07.2005, 07:21 PM The drawing on the left is incorrect (one of the batteries has two red wires and the other has two black wires). Basically, for a series connection, wire as follows: Connect the two RED battery leads from the controller to the POSITIVE side of a male dean's connector. Connect the two BLACK battery leads from the controller to the NEGATIVE side of ANOTHER male dean's connector. Then, connect the two attcahed dean's connectors to each other with another wire(positive to negative). When you plug in the batteries, they will be wired in series.