RC-Monster Forums - View Single Post

Serum · 01.08.2007, 04:39 PM

Hi Mahazael!

welcome to the forum.

You can't use the Neu 1.5d/F on 8S, it would run hot. Too hot, and too high in RPM. a better choice would be a Lehner motor (non high-amp), if you're planning on using it on 4 and 8S. The Lehner motors can be configured like a Y and a W wind, which results in a different KV value; lets say in standard configuration it runs 2200rpm/V; in a star configuration (which can be done with the use of a soldering iron) the motor is 2200/1.73=1271 rpm/V.

And yes, it is as easy as that. you can use all different kind of connections to make an 8S out of 2 4S packs. It doesn't need to be 1 8S pack.

With 4S and the Neu motor you can kick nitro's butt.

	(#2)
Serum RC-Monster Admin Offline Posts: 10,480 Join Date: Feb 2005	01.08.2007, 04:39 PM Hi Mahazael! welcome to the forum. You can't use the Neu 1.5d/F on 8S, it would run hot. Too hot, and too high in RPM. a better choice would be a Lehner motor (non high-amp), if you're planning on using it on 4 and 8S. The Lehner motors can be configured like a Y and a W wind, which results in a different KV value; lets say in standard configuration it runs 2200rpm/V; in a star configuration (which can be done with the use of a soldering iron) the motor is 2200/1.73=1271 rpm/V. And yes, it is as easy as that. you can use all different kind of connections to make an 8S out of 2 4S packs. It doesn't need to be 1 8S pack. With 4S and the Neu motor you can kick nitro's butt.