RC-Monster Forums - View Single Post

neweuser · 01.11.2007, 04:16 PM

As Serum said, the UE shaft kit should come with two types of spacers. One set is for large bearings, the other for reg bearings. When using the spacers, you should be able to snug the nutz pretty good. There should be no binding at all and the wheel should spin freely.

	(#11)
neweuser RC Monster, the Final Frontier Offline Posts: 3,379 Join Date: Feb 2006 Location: Minnesota	01.11.2007, 04:16 PM As Serum said, the UE shaft kit should come with two types of spacers. One set is for large bearings, the other for reg bearings. When using the spacers, you should be able to snug the nutz pretty good. There should be no binding at all and the wheel should spin freely. "if you've got something to say, say it peacefully"