Quote:
|
Originally Posted by Serum
If you need the bottoming, then yes. If you don't need the bottoming, but if you want to make thru holes, you can better use a taper or a plug tap.
If you go in the material with a bottoming tap, the tap will break easier. but if you use a taper /plug tap first (or both) the tap will break less quick.. Get it?
|
I belive so, but was that the correct one other than that particular detail? I think I'll get the plug type too. What do you mean by "Break"?
Also, am looking for a tool that can make it so I can "set" the screw and am not finding it?