RC-Monster Forums - View Single Post - Best Chassis, etc for a e-revo racer

Serum · 04:35 PM

Good to hear you like to bbq.. The bpp truck got me worried for a while..

Viruss has his 4S powered lightning with an even lower CG doing backflips at 30 mph+ on a 1930/8 motor. with 50K oil in the diff..

It's rather hard not to get pancakes on the front tires. pancakes loose grip, due to a small contact area with the track/road. I think it would be wise if they started making threaded tires.

Perhaps i should say 'in my very own opinion it would be more impressive if it did that with 10K oil', In other words; I am personally not impressed by a truck that does backflips with 300K oil in the centerdiff with 2500 watts of power... It's common sense (IMO)

@ leroy; that was a 6pole 1350 Kv motor that was in it.. If you are interested, i have got it laying here.. Doing nothing with it..

	(#108)
Serum RC-Monster Admin Offline Posts: 10,480 Join Date: Feb 2005	01.21.2007, 04:20 PM Good to hear you like to bbq.. The bpp truck got me worried for a while.. Viruss has his 4S powered lightning with an even lower CG doing backflips at 30 mph+ on a 1930/8 motor. with 50K oil in the diff.. It's rather hard not to get pancakes on the front tires. pancakes loose grip, due to a small contact area with the track/road. I think it would be wise if they started making threaded tires. Perhaps i should say 'in my very own opinion it would be more impressive if it did that with 10K oil', In other words; I am personally not impressed by a truck that does backflips with 300K oil in the centerdiff with 2500 watts of power... It's common sense (IMO) @ leroy; that was a 6pole 1350 Kv motor that was in it.. If you are interested, i have got it laying here.. Doing nothing with it.. Last edited by Serum; 01.21.2007 at 04:35 PM.