RC-Monster Forums - View Single Post - Please help with G2R Brushless suggestions

BP-Revo · 11:51 PM

I'd run Maxamps 8000mah 2S2P Lipo's with a Mamba Max ESC w/ a UBEC and an 8XL or 9XL, or possibly a 10XL motor.

The 10XL wont be very fast but you will get ages of run time (easily over an hour) with the batteries I mentioned.

I think a good balance would be the 8XL (or maybe the 9XL). I would assume runtimes around 45-50 minutes are easily possible with those packs.

The 8XL will give a nod toward speed, while the 9XL will give a nod toward run time. But they both won't be too far off from eachother (speed will be within 3-4mph and runtime will be within about 5-7 minutes).

If you dont mind the extra weight, you can try the 12000mah 2S3P Lipo's. They weight more than a 7 cell pack (while the 8000's wiegh less than a 6 cell pack). However, obviously, they have 50% more capacity than the 8k's.

	(#2)
BP-Revo BMW M Power! Offline Posts: 1,910 Join Date: Jan 2006 Location: SoCal	01.21.2007, 11:50 PM I'd run Maxamps 8000mah 2S2P Lipo's with a Mamba Max ESC w/ a UBEC and an 8XL or 9XL, or possibly a 10XL motor. The 10XL wont be very fast but you will get ages of run time (easily over an hour) with the batteries I mentioned. I think a good balance would be the 8XL (or maybe the 9XL). I would assume runtimes around 45-50 minutes are easily possible with those packs. The 8XL will give a nod toward speed, while the 9XL will give a nod toward run time. But they both won't be too far off from eachother (speed will be within 3-4mph and runtime will be within about 5-7 minutes). If you dont mind the extra weight, you can try the 12000mah 2S3P Lipo's. They weight more than a 7 cell pack (while the 8000's wiegh less than a 6 cell pack). However, obviously, they have 50% more capacity than the 8k's. BL Revo: CF G2R, LMT1940/7, 6S FP 30C Lipos, MMM, Hitec 5955TG CRT .5: 7075 Ext Chassis, LMT1930/7, FP 25C 3S Lipos, MM Last edited by BP-Revo; 01.21.2007 at 11:51 PM.