RC-Monster Forums - View Single Post

Procharged5.0 · 01.25.2007, 12:58 AM

Thanks hippie!

Production pieces are not far off. I've had trouble with the Delrin spurs mostly.

I was asking about the GMaxx motor mount so that there was adequate clearance between the slipper and the motor mount. I have a 4mm motor plate with 3mm clearance on the slipper. so a 6mm mounty should have just enough clearance.

Anyone with a G-Maxx motor mount................

Can you measure it for me please????

	(#14)
Procharged5.0 RC-Monster Titanium Offline Posts: 1,729 Join Date: Apr 2006 Location: Chicago, IL Area	01.25.2007, 12:58 AM Thanks hippie! Production pieces are not far off. I've had trouble with the Delrin spurs mostly. I was asking about the GMaxx motor mount so that there was adequate clearance between the slipper and the motor mount. I have a 4mm motor plate with 3mm clearance on the slipper. so a 6mm mounty should have just enough clearance. Anyone with a G-Maxx motor mount................ Can you measure it for me please???? Supermaxx-Racer-X, VBS, FLM chassis & Transcase, HSR Motorsports Slipper, Cage, MMM ESC, NEU1515. REVO 3.3, BL X1-CRT, CRT, BL-CRT.5, Procharged '92 Mustang visit www.chitownrc.com and www.rcbros.com