RC-Monster Forums - View Single Post

renny · 02.04.2007, 03:55 AM

I bought a nemesis motor from fine design and it came with two alum. pipe clamp style mounts so I just set my gear gap, marked the hole locations on the stock revo chassis.The outside holes just missed the chassis so I put a small 1 3/4" X 2 1/4" X 1/8" thick piece of flat alum. right under the mounts and drilled four holes and bolted the mount from the bottom for extra support.

	(#4)
renny if you build it.... Then I can break it Offline Posts: 73 Join Date: Jan 2007 Location: albert canada	02.04.2007, 03:55 AM I bought a nemesis motor from fine design and it came with two alum. pipe clamp style mounts so I just set my gear gap, marked the hole locations on the stock revo chassis.The outside holes just missed the chassis so I put a small 1 3/4" X 2 1/4" X 1/8" thick piece of flat alum. right under the mounts and drilled four holes and bolted the mount from the bottom for extra support.