RC-Monster Forums - View Single Post

BrianG · 02.13.2007, 05:44 PM

There are a couple things to consider when making cooling mods involving the body and piping; 1) When you replace the body, you have to move the mod as well. 2) If you land on the lid, the pipe may be smashed against whatever it is near (of course if you don't crash, you don't have to worry about this. :)). 3) Routing the pipe around all the other parts.

If at all possible, I alwys see if I can add another/more heatsink rather than going with a more exotic cooling solution. Keeps it simple too.

Just my $0.02...

	(#11)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	02.13.2007, 05:44 PM There are a couple things to consider when making cooling mods involving the body and piping; 1) When you replace the body, you have to move the mod as well. 2) If you land on the lid, the pipe may be smashed against whatever it is near (of course if you don't crash, you don't have to worry about this. :)). 3) Routing the pipe around all the other parts. If at all possible, I alwys see if I can add another/more heatsink rather than going with a more exotic cooling solution. Keeps it simple too. Just my $0.02...