RC-Monster Forums - View Single Post - MM questions

MetalMan · 02.16.2007, 06:24 PM

Sounds like you did some GPS testing :027:. And I'm glad to hear you want to get into real brushless :005:.

A Lehner motor would sure allow your Revo to be faster than my Revo. 50mph, however, might be a stretch. As you know, I have to run a fan on the MM in my Revo with a 7XL on 16.5v, and it's getting to at least 40mph (I'll have to slap the GPS on it some time). The Lehner will run more efficiently, so at the same speed as the 7XL it should be easier on the ESC. I would say sell your HV stuff first (since you're waiting for the x-braces anyways), and then get the sensorless system.

	(#3)
MetalMan RC-Monster Mod Offline Posts: 5,297 Join Date: Mar 2005 Location: SoCal	02.16.2007, 06:24 PM Sounds like you did some GPS testing :027:. And I'm glad to hear you want to get into real brushless :005:. A Lehner motor would sure allow your Revo to be faster than my Revo. 50mph, however, might be a stretch. As you know, I have to run a fan on the MM in my Revo with a 7XL on 16.5v, and it's getting to at least 40mph (I'll have to slap the GPS on it some time). The Lehner will run more efficiently, so at the same speed as the 7XL it should be easier on the ESC. I would say sell your HV stuff first (since you're waiting for the x-braces anyways), and then get the sensorless system. SH Z-Car, Custom Crawler, 8s Savage, 12s XTM XLB 1/7 buggy, 4wd 4-link rear/IFS Pro4 truck, Custom Hyper 10 Short Course, Belt-Drive Mammoth ST 1/8 truggy, 4s 17.5 MM Pro HPI Blitz