RC-Monster Forums - View Single Post

steveo · 02.24.2007, 11:17 PM

ok now thats cleared up, then the motor i bought from the Lhs is an L motor it had a longer magnet and 5mm shaft, ok when i ran this motor on the gearing i used for the other motor 16/72 this is where it gets weird i checked temps after some 2nd gear wot runs and the temp was 93 on speedo and 115 on the motor but the speedo was much hotter to the touch than the motor, also checked the caps they where 140 but they are probably always hot, i would like to make this motor work for the truck, also with the other speedo i had the esc would heat up faster than the motor, i have never really run the truck hard with this motor because of that, so am i under or over or under geared.

	(#8)
steveo RC-Monster Carbon Fiber Offline Posts: 252 Join Date: Feb 2006 Location: west palm beach fl,	02.24.2007, 11:17 PM ok now thats cleared up, then the motor i bought from the Lhs is an L motor it had a longer magnet and 5mm shaft, ok when i ran this motor on the gearing i used for the other motor 16/72 this is where it gets weird i checked temps after some 2nd gear wot runs and the temp was 93 on speedo and 115 on the motor but the speedo was much hotter to the touch than the motor, also checked the caps they where 140 but they are probably always hot, i would like to make this motor work for the truck, also with the other speedo i had the esc would heat up faster than the motor, i have never really run the truck hard with this motor because of that, so am i under or over or under geared.