|
03.01.2007, 01:07 AM
Nah, I wouldn't want you to go through the trouble. The design isn't that bad, it just needs a cross brace or two between each "arm" on the brace and the tranny mount area needs to be a little beefier, since all the stress is placed on the narrow point.
BL Revo: CF G2R, LMT1940/7, 6S FP 30C Lipos, MMM, Hitec 5955TG
CRT .5: 7075 Ext Chassis, LMT1930/7, FP 25C 3S Lipos, MM
|