RC-Monster Forums - View Single Post

glassdoctor · 04:52 PM

Hmmm.. that's a big topic here... the MM and Neu combo.

I'm doing it... but it's tough to recomend it due to the potential cogging problems.

EDIT: I did just take the MM out of the CRT and put in a 125b... which seems buttery smooth.

With the motor wires direct soldered, I'm having pretty good results. But there is still a bit of cogging occasionally. So far it's not bad and I could recomend it if the other advantages outweigh this flaw.

But I'm concerned that a bad episode of cogging could ruin a MM. That happened to me recently. (before removing the 4mm connectors and hardwiring it)

IF Castle comes through with a software update to fix it... then I will absolutely recomend this setup to everyone!

BTW, I have heard from more than one person that the MM works awesome with a Pletty Maximum... zero cogging so they say. So i have faith that CC can fix this issue.

	(#45)
glassdoctor TEAM FUSION Offline Posts: 2,041 Join Date: Jul 2006 Location: Iowa... Hawkeye country	03.05.2007, 04:50 PM Hmmm.. that's a big topic here... the MM and Neu combo. I'm doing it... but it's tough to recomend it due to the potential cogging problems. EDIT: I did just take the MM out of the CRT and put in a 125b... which seems buttery smooth. With the motor wires direct soldered, I'm having pretty good results. But there is still a bit of cogging occasionally. So far it's not bad and I could recomend it if the other advantages outweigh this flaw. But I'm concerned that a bad episode of cogging could ruin a MM. That happened to me recently. (before removing the 4mm connectors and hardwiring it) IF Castle comes through with a software update to fix it... then I will absolutely recomend this setup to everyone! BTW, I have heard from more than one person that the MM works awesome with a Pletty Maximum... zero cogging so they say. So i have faith that CC can fix this issue. Jammin CRT MM/Neu 1515 1700kv Losi 8IGHT MM/Neu 1512 1900kv Kyosho 777 T4 MM 5700 B4 LRP XX4 MM 7700 old losi xxcr, MM4600 4s lipo 70mph+ Last edited by glassdoctor; 03.05.2007 at 04:52 PM.