Aside from the physical connector size differences, the only other difference I've seen is that the Hyperion skips connector slots. So, if you have a 2s pack and a 4s tap connector, the layout goes: + - . . - (the dots are empty slots in the connector). Aside from that, don't all other connectors wire the cells in succession? Like this: -C1-C2-C3-C4- (the dashes are the tap wires from each cell).
It seems like there is much confusion about taps in general. Some balancers like the the "
ultra Balancer" have 0.1" spaced pins that will fit most of the connectors except TP. And for those you get a little adaptor plug.
The only other thing to remember is to make sure you have the plug oriented correctly I guess, but the wires are usually marked something that makes sense. Even without markings, it takes about 10 seconds to measure the taps and mark the most positive wire.