RC-Monster Forums - View Single Post

SpEEdyBL · 06.29.2005, 05:13 PM

Putting the packs in a series will make the motor want to draw more amps due to the higher voltage, but if the packs will only allow 60 amps, they will only provide 60 amps. However, putting the packs in parallel will allow 120 amps (60 from each pack) but the voltage will stay the same and the motor will not ask for any more than it did with just one pack.

My guess is that it's not a good Idea to continuously draw max amps from the pack.

	(#3)
SpEEdyBL "Out of spec" enthusiast Offline Posts: 820 Join Date: May 2005	06.29.2005, 05:13 PM Putting the packs in a series will make the motor want to draw more amps due to the higher voltage, but if the packs will only allow 60 amps, they will only provide 60 amps. However, putting the packs in parallel will allow 120 amps (60 from each pack) but the voltage will stay the same and the motor will not ask for any more than it did with just one pack. My guess is that it's not a good Idea to continuously draw max amps from the pack. Check out my custom converted 8ight: Sub 7lb, lowest CG of any 1/8 buggy http://www.rc-monster.com/forum/show...894#post367894 Area 52 Ranch Raceway T.R.C.R.