RC-Monster Forums - View Single Post - Starting from scratch

BrianG · 03:06 PM

~19:1 is a fairly typical final ratio for a MT with those sized tires (which I think are 5.65" IIRC for standard MT tires). Shouldn't be bad at all even locked into second gear. Of course, I'm assuming your motor will be the typical XL size motor found in the RCM store. If it is an L size, the two speed might be better off.

:Off topic: If you know the gear tooth counts of the diff ring/pinion, and the tooth counts of the tranny gears, I'd appreciate those numbers to I can add them to the speed calculator presets.

	(#22)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	04.05.2007, 03:05 PM ~19:1 is a fairly typical final ratio for a MT with those sized tires (which I think are 5.65" IIRC for standard MT tires). Shouldn't be bad at all even locked into second gear. Of course, I'm assuming your motor will be the typical XL size motor found in the RCM store. If it is an L size, the two speed might be better off. :Off topic: If you know the gear tooth counts of the diff ring/pinion, and the tooth counts of the tranny gears, I'd appreciate those numbers to I can add them to the speed calculator presets. Last edited by BrianG; 04.05.2007 at 03:06 PM.