RC-Monster Forums - View Single Post

riceman · 03:15 PM

You read my mind! I thought about refilling the existing un used part with JB weld. I was thinking of mounting evertying up and putting grease on the screw so the JB would stick to the chassis and not the screw so the screw could still be removed.

I also failed to mention that I need to make up a new top plate. The stock one fit back on top after truning it sideways but it wasn't an exact fit. I went with it for the bench test as nothing was binding.

	(#5)
riceman RC-Monster Gold Offline Posts: 281 Join Date: Oct 2006	04.05.2007, 03:13 PM You read my mind! I thought about refilling the existing un used part with JB weld. I was thinking of mounting evertying up and putting grease on the screw so the JB would stick to the chassis and not the screw so the screw could still be removed. I also failed to mention that I need to make up a new top plate. The stock one fit back on top after truning it sideways but it wasn't an exact fit. I went with it for the bench test as nothing was binding. Last edited by riceman; 04.05.2007 at 03:15 PM.