[MikeyLikesItSI]

AAngel, I just purchased a neu 1515 1y and 16016 controller from mike too. I didn't get to use mine for more then 45 seconds. The BEC burned up on mine and destroyed both my servo's as well. Fortunatly the reciever is ok. I converted my t-maxx to 4s lipo with the said controller and motor. I had a hitec hs-945 servo for steering, and a traxxas 2055 servo for brakes. The truck never made it to second gear because it was having cut off problems like you were experiencing, which was somewhat surprising since i have 2 2s2p 6000mah lipo's in series to the controller.

The esc still works, but will not seem to supply power to the reciever to make other servo's work. I was hoping mike might exchange this for me (waiting to hear from him) but if he doesn't, i'll probably try to get a UBEC and replace the servo's and see what happens.

I have an MGM 8012 on my touring car with one of the mamba 540 brushless motors and am pretty pleased with it. It was because of my experience with the MGM i decided to get another.

EDIT: my 16016 is ver 2.32 also