Quote:
|
Originally Posted by BrianG
Well then, if you only had your UBEC hooked up, I would suggest checking the output of the UBEC. If it is faulty, it can send full battery voltage as well...
|
Forgot to mention that voltage at the receiver was 5.57-5.58 the whole time (I have a Sensor). The transceiver still powers up and connects with my transmitter (for those unfamiliar with the Sensor, there is aubible and visible confirmation of events such as these), there just isn't any transfer of signal to the servos. Well there was, until I plugged in my MGM.