What the heck.I can not win T8 1750

[bryan]

After selling my 2200 kv castle motor that was awsome,but overpowering my truggy and buying an rx 10 with a t81750 motor my temps and performance "were" awsome.were as in under 10 5s packs my l.h.s. Told me that these motors had updated rotors.apparently there are still some old guys out there.is there a way to tell the difference. I am in need of help team tekin.and how do i send this in for repair/replace.my truggy is currently dead in my garage and i can not afford to buy anymore expensive electronics.

[brushlessboy16]

Yes they are completely different.

Post a pic
Newer style has a large aluminum plate ONLY on the front side

[bryan]

Here is a picture hopfully.Attachment 7878

[brushlessboy16]

We need a picture of the rotor..

[bryan]

Picky picky thanks ill tear it down in the morning, or after work

[Snipin_Willy]

Tekin has been great about sending out rotors for replacements. I would suggest removing the rotor from the can and investigating whether the magnets have broken loose from the armature. If this is the case call up Tekin product/service support and give them the details. You may find them happy to help you out by sending you a new rotor, it's as simple as that.

[bryan]

Here is apicture of the rotor

[RC-Monster Mike]

That is the new style rotor. Your LHS didn't lie to you and Tekin will take care of you when you send it in. :)

yes it is, they need to smack the guy gluing these

[bryan]

So will i need to send this in, or will they just send me one like they were if you had the old style

[Marvin]

I have had new ones sent to me, without having to send them back. Then again though, I live in the UK, so may just be making an exception.

[bryan]

I GOT AHOLD OF TEKIN AND THEY ARE GOING TO SEND ME A NEW REPLACEMENT ROTOR NO QUESTIONS ASKED.AWSOME C.S..GOING TO GET SOME GREEN LOCTITE SO I WILL HAVE A BACK UP. THANKS

[brushlessboy16]

i Had the same problem. first gen rotor failed, called and they sent me the 2nd gen.

Used 2 part epoxy on my original and it works great- havent installed the 2nd gen yet

my 1550 made three laps before coming undone, i green locktited it and its fine, there was no sign of glue on the rotor at all

[bryan]

Its been almost four months and i still havnt had to install the replacement rotor Tekin sent me out! The green loctite is holding its own.