Mamba Max leds flashing => what is wrong ?

[miniGranis]

Where can I find info about what the flashing led's on a Mamba Max means ?
One of mine is not arming and only flashes all three led's.

/Emil

[suicideneil]

If its not covered in the manual, a phone call to Castle might be in order.

[miniGranis]

Dont know if I am blind but all I can find about led's in the manual has to do with calibration.
I cant even find info abut thermal shutdown etc, perhaps I am looking in the wrong place ?

[DRIFT_BUGGY]

I couldn't find it in the manual or on their site, may have to call up

[Pdelcast]

Flashing LEDs (all three colors) means NO RADIO SIGNAL. Nothing coming from the RX.

[bdebde]

Originally Posted by Pdelcast

Flashing LEDs (all three colors) means NO RADIO SIGNAL. Nothing coming from the RX.

Got a FAQ or something somewhere that we could find all the codes in?

[kyosho501x]

pdelcast is right, i had that happen to me once

Originally Posted by kyosho501x

pdelcast is right

On the subject of Castle anything I would hope so

[RBMike]

Originally Posted by kyosho501x

pdelcast is right, i had that happen to me once

That is funny.

[miniGranis]

Talked to CC yesterday and got a mail from Joe Ford as well, thanks. (living in Sweden does mean some time difference..)
Loss of radiosignal indeed, the tech rep. also told me that this can happen when using a spektrum 2.4 GHz receiver and you get a voltage drop that causes the receiver to reboot. Adding a capacitor on the receiver helps alot according to him and since I use a Hitec with Spektrum module that is what I will do.
Great support CC thanks alot.
I agree with bdebde: Getting all possible led flashes in a Faq would be of great help.