Quark email address.

I had sent an email to the quark address listed to see if there was anyone who would answer,after hearing that no one was.I received this earlier. Hi. Adam.

Just our US office is shut down now.

but Korea head office is still on the business .

If you need repair or support. just let me know through this e-mail address

Thank you.

--
Best Regards

JoeJoe

Sky & Technology Co.,Ltd joejoepeace@gmail.com So I was glad to get a response from them.I received my Quark 80b today now I'm just looking for the right caps,I had seen someone on here had some for sale,or any ideas?

[sikeston34m]

Hi Asheck,

This must be your lucky day. LOL

I've believe the Novak HV Capacitor to be one of the best ones for this.

Well guess what?

I found the EXACT same capacitor that Novak uses on Ebay, but for MUCH cheaper.

I ordered some and compared side by side with the Novak HV Cap.

Check this out: http://cgi.ebay.com/2700uf-Low-ESR-c...QQcmdZViewItem

[TexasSP]

Somehow it doesn't surprise me. Good find though.

[sikeston34m]

I ordered several just to stock up for future mods.

One of these days, I'm gonna get a MMM. LOL

This seller sent my package quickly and it was well packed.

Well I just ordered a few also,but don't I want 35v for my Quark?

[sikeston34m]

Most people suggest having some slack "overhead" voltage rating.

However, I have ran this Capacitor on 6S with great results.

These Caps are rated for 25 volts. 6S fresh off the charger is 25.2 volts. Close enough in my book.

I only really plan on 5s anyway so this should be perfect.So I ordered 5,how many do you think the quark warrants?

[lincpimp]

Originally Posted by asheck

I only really plan on 5s anyway so this should be perfect.So I ordered 5,how many do you think the quark warrants?

2 should be plenty.

has anyone gotten repair work on their quark esc this year. i've tried joejoepeace@gmail.com to no avail. i dont care how long it takes (other projects) but i would like it repaired
thanks

[Patrick]

Originally Posted by e-rev project

has anyone gotten repair work on their quark esc this year. i've tried joejoepeace@gmail.com to no avail. i dont care how long it takes (other projects) but i would like it repaired
thanks

I've been trying that address as well with no response. If anyone finds something out I'll be interested.

[snellemin]

You could try Quarks Korean support forum. It's still active.

[Pete]

You should get them on this..

pjwan75@naver.com

[ANGRY-ALIEN]

Originally Posted by sikeston34m

Most people suggest having some slack "overhead" voltage rating.

However, I have ran this Capacitor on 6S with great results.

These Caps are rated for 25 volts. 6S fresh off the charger is 25.2 volts. Close enough in my book.

Hey sikeston (or anyone else), do you have a model number for those Caps? I found THIS ONE, but i'm not sure it'll do the job.

I'm currently running 16 GPs with my 125B, but I'll be running 5s soon.

Alien

[crazyjr]

Originally Posted by sikeston34m

Most people suggest having some slack "overhead" voltage rating.

However, I have ran this Capacitor on 6S with great results.

These Caps are rated for 25 volts. 6S fresh off the charger is 25.2 volts. Close enough in my book.

hey sikeston, was that with the quark? Mine (125/80 quark's) has a slight cog or hesitation with a fresh 6s setup, so, would the cap/caps work and allow me to run 6s without fear? How are the caps setup and how do you like the quark on 6s?

[suicideneil]

The quarks were always twitchy with 6s fresh off the charger, not sure if the caps would help that really- a lower charge voltage (95% say) works wonders aparently.

As for the caps, dont go with the novak module, thats the one that has been blowing up on hvmaxx escs ever since they updated it. The specs you want are:

25v (or 35v), low esr, 105*C, 2700uf (I wouldnt excede about 6000uf if you use several in parallel). A few examples:

one

two

three