Where to buy to hobbywing 150a escs all are out of stock??

[naynay12]

Well i bought a 150a ezrun esc about a month ago off ebay and it turned out to be a scam...well i got my money back though paypal anyway...
Now i cannot seem to find these escs anywhere,can someone please give me a link to some shops that arn't out of stock,not even ebay has any.If the rumours are true and they are not making them anymore,i already have abought the prgoramming card
Anyone have any goss on whats going on or any online sites that sell them?

[lincpimp]

Just buy a MMM and skip the HW esc. Better product, better service........ You could contact Mike at rcm about the HW, he may have some?

[brian015]

Kershaw Designs has some new 80A esc's in stock and they say the new 150A's will be available 12/3.

http://www.kershawdesigns.com/

[suicideneil]

Try the 150amp esc from hobbycity- supposedly the same thing just with a different casing & other minor details:

http://www.hobbycity.com/hobbycity/s...shless_Car_ESC

0 stock currently but they are expecting more in it seems...

[BL_RV0]

Originally Posted by naynay12

Now i cannot seem to find these escs anywhere,can someone please give me a link to some shops that arn't out of stock,

Originally Posted by suicideneil

Try the 150amp esc from hobbycity- supposedly the same thing just with a different casing & other minor details:

http://www.hobbycity.com/hobbycity/s...shless_Car_ESC

0 stock currently but they are expecting more in it seems...

[timaneli]

http://cgi.ebay.com/Sensored-1-8-RC-...item56376da469

new version that will substitute ezrun ones. smaller and same specs.

http://cgi.ebay.com/Xerun-1-8-Brushl...item53de4d3765
new combo also.

i have one already waiting to arrive!!

mambas are very good but here i have seen more problems in them that in all ezruns i have seen run here.
i have seen run them with castle motors, novak hv motors and others and only one burn, and it was repared... funny isn´t??

and mambas even the switch and fans broke...

regards

[superek4]

Try www. Rcfan88.com

[Semi Pro]

Originally Posted by lincpimp

Just buy a MMM and skip the HW esc. Better product, better service........ You could contact Mike at rcm about the HW, he may have some?

+1 get a quality esc the mmm is alot better for just alittle more money + it has a warrenty

[superek4]

Hobbywing has warranty I get one to one exchange from them. They even sent me a prototype to test. For that price n service nothing beats hobbywing. I m winning races & get good advise n support from them.

[naynay12]

I have bought one from rcfanns88 about a month ago before i got scammed on ebay,and then they came back to me saying they are out of stock and never going to get more in...
The esc on ebay looks nice though it is only 80A!I need the 150A one since im running the mamba 2200kv motor,and 100a rated turnigy batteries.
Also if i click on the link on hobbycity it does not work??

Thanks for the advice so far.
P.S The MMM esc is a bit exoensive,cheapest i doung is like $160 with posatge to australia,i can used to eb able to get the ezrun for around $100.

[suicideneil]

Hobbycity link works fine- make sure you click on my original link and not the abreviated one in the quote. ~$75 = bargonza...

[reno911]

Stumbled across this tonight. I have one on order from Kershaw designs but with their motor.
http://translate.google.com/translat...un-p-4490.html

[What's_nitro?]

Originally Posted by reno911

Stumbled across this tonight. http://translate.google.com/translat...un-p-4490.html

Am I reading that link correctly? $1899.00 USD ??? Google needs to work on their translating...me thinks.

[reno911]

Danish Krone to USD equals about 380.

I am not too concerned about their price it is the only place I have found complete updated photos of the newer units.

[naynay12]

Ok i bought the esc from hobbyking,though it is on backorder so i can cancel anytime.I just realised i will be using 5s and the esc says 4s max,should i be worried?

http://www.hobbycity.com/hobbycity/s...shless_Car_ESC