rcm kyosho dst conversion

[willie]

hi guys

i sent this to mike a while back and he made me up a battery tray and motor mount. i have 2 of these one was a dbx and the other a dst. the dst body works fine but the dbx body is too low for the 4s battery i'm using, a 3s will fit under the buggy body.

i'm only running one now with a neu 1509 1.5y with a mamba max/ccbec. i also used a radio box for a dbx ve on this one.

the other i think i'm going to use a rx8 with a 2650kv buggy motor, i really just want to try out the sensored motor.

also the battery tray i had made is small (140x44), but does have an esc mount. i've been using 4s 5000mah hyperion cx batteries and they fit great.

anyways here are some pics for ya.

[brushlessboy16]

Looks nice! Needs more power. :) Overkill is what we strive for here at rc-monster

[simplechamp]

Check out the Mamba Max Pro if you are looking to use a sensored motor. Should handle a Tekin buggy motor fine in that size of vehicle.