Missing bearing for GARC diffcase

[Klausen]

I am missing 2 bearings in 8 x 15 x 4 mm. for my diffcases from GARC.

I have looked around, but can't seem to find any. It is for one of the output sites on a GARC diffcase with the diffs from the E-maxx bl-edition inside.

Can anybody help out on where I can get these.

[whitrzac]

http://shop.ebay.com/?_from=R40&_trk...All-Categories

http://shop.ebay.com/?_from=R40&_trk...All-Categories

[JERRY2KONE]

The only place I have found them is on VXB bearings for $10 a piece. If you find any please share the link with us. I need some, but I qm not willing to pay $10 for one little bearing. I need 4 for axle Knuckles so I can use my UE 8mm axles. Good luck with your quest.

[Arct1k]

http://www.bocabearings.com/bearing-...6700ZZ-10x15x4

Boca 5.75

[JERRY2KONE]

Originally Posted by Arct1k

http://www.bocabearings.com/bearing-...6700ZZ-10x15x4

Boca 5.75

The request is for 8 X 15 X 4, and they do not carry them either.

http://www.vxb.com/page/bearings/PROD/Kit8155

[Klausen]

The VXB link is 8 x 15 x 5 an not 8 x 15 x 4?

[JERRY2KONE]

Originally Posted by Klausen

The VXB link is 8 x 15 x 5 an not 8 x 15 x 4?

Yea I know, but that is the only 8mm X 15mm bearing I have been able to find. I haven't even seen one 4mm wide. Thats why I said please share a link if you do find one. Odds are pretty good that even if you do find one that it will be substandard. I try to use only the stainless steel shielded bearings for their durability. They tend to last longer than most others. Considering that we require them and have been looking for them for a while now I want to believe that someone must be making and selling them, but I have not found a manufacturer yet for the 8mm X 15mm bearing. Like I first stated $10 of one bearing is just too much in my book.