help for maxx

[thomasmaxx]

hi to all i have a problem and i will need your help
I have an e maxx whith tons of upgrade G2 gorillamaxx , hardocore racing tower - skid plates , proline shoks , monster mamba motor ( and a lehner ) 40 big joes wheel from proline steel dvds , etc etc this baby is cost me a lot of money and since i am from greece the cost was big with all the transports since here there is no traxxas store .It was lay at my warehouse for to long and its time to live again so a have some questions
1 can i put the new slipper cluch is it fit ? ( my old is not holding much more its time to chance it before its complety broke )
2 or can i put the new 3905 diff s do they fit ?
3 and what gearing u propose whith the mamba 2200 ?
4 where can i find a single speed transmision case ? ( the 2 speed is not working so well but gorilla is closed ... )

to much questions i know but here the traxxas are rare
thanks ( more questions to come be patience whith me )

[Klausen]

1: You can use this one: http://www3.towerhobbies.com/cgi-bin...?&I=LXBJB5&P=7

2: 3905 diffs will work ok, but you need the diffcases and bearings as well, as they are not the same as the ones on the 3906.

3: I had mine geared 66 on the spur and 25 on the pinion on 4s lipo.

4: Ebay is your best chance.

[thomasmaxx]

i was wonder if the new transmission is fit ? if so i will be solve my problem whith the slipper clutch and i think the new is better also

[ZippyBasher]

I believe this is what you are looking for:

http://www.fastlanemachine.net/prodd...LM10600&cat=33

Allows the use of 3905 Transmission in place of 3906... If it worked on FLM chassis why not Gorrilamax? Must have same mounting holes. Cheap solution, I hope...

EDIT: Yes the new 3905/3908 trans is very tough. 2 years of 6s and no problems...
And for diffs. Look into LST XXL complete blue diff on ebay. Very easy to fix into Maxx bulks and very strong See here:

http://www.rc-monster.com/forum/show...st2+diffs+maxx

You can see my Maxx if you click my OVERPOWERED Ride link below...

[thomasmaxx]

if it works it will be great maybe i e mail them to ask .... and maybe they anser