 |
|
|
|
|
|
 |
 |
My maxx |
 |
|
 |
|
(#1)
|
|
RC-Monster Stock
Offline
Posts: 47
Join Date: Nov 2011
Location: wa.
|
My maxx -
01.10.2012, 10:55 PM
it's my tmaxx now brushless
|
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
RC-Monster Stock
Offline
Posts: 47
Join Date: Nov 2011
Location: wa.
|
01.11.2012, 12:50 AM
2 VX G3 5400mah 2s MM2200KV XTM big block chassis 3906 trany locked in 2nd ue 8 diffs ue shocks mip cvds rpm arms & RPM Axle Carriers ue rear dog bone ofna dom front dog bone hc titanium skid
|
|
|
|
|
|
|
|
Yep |
|
|
|
|
|
(#4)
|
|
|
Brushless G-maxx
Offline
Posts: 378
Join Date: Jan 2006
Location: Denmark
|
Yep -
01.11.2012, 11:31 AM
Quote:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
RC-Monster Stock
Offline
Posts: 47
Join Date: Nov 2011
Location: wa.
|
01.11.2012, 01:21 PM
back flip
|
|
|
|
|
|
|
|
pics |
|
|
|
|
|
(#6)
|
|
RC-Monster Stock
Offline
Posts: 47
Join Date: Nov 2011
Location: wa.
|
pics -
01.11.2012, 06:10 PM
pics
|
|
|
|
|
|
|
|
|
|
|
|
|
(#7)
|
|
RC-Monster Stock
Offline
Posts: 47
Join Date: Nov 2011
Location: wa.
|
01.11.2012, 08:49 PM
next mod is lst2 axles proline 23mm hex rpm revo carries
|
|
|
|
|
|
|
|
|
|
|
|
|
(#8)
|
|
Got Brushes? NOT
Offline
Posts: 117
Join Date: Apr 2009
Location: Lithuania
|
01.12.2012, 11:24 AM
Looks sexy lol. What size carrier bearings (both, inner outer) did you use with lst driveshafts?
|
 |
|
|
|
|
|
|
|
|
|
|
(#9)
|
|
Old Skool
Offline
Posts: 7,494
Join Date: Feb 2007
Location: Devon, England
|
01.12.2012, 01:41 PM
I was gonna ask the same thing- every guys that has done the LST cvd upgrade has had to run odd-sized bearing or shim them to make them fit correctly- did you have to do anything special as such?
|
|
|
|
|
|
|
|
|
|
|
|
|
(#10)
|
|
RC-Monster Stock
Offline
Posts: 47
Join Date: Nov 2011
Location: wa.
|
01.12.2012, 02:15 PM
big hole is 24.5mm I used two 15x24 and alum tape. small end is 15mm now 5/8 so 16x8mm fits good and tight I'll try to post some better pic of how I did it later
|
|
|
|
|
|
|
|
|
|
|
|
|
(#11)
|
|
RC-Monster Titanium
Offline
Posts: 1,419
Join Date: Dec 2008
Location: Louisville, KY
|
01.12.2012, 04:37 PM
Did you have to drill new holes in the axles? Nice truck BTW.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#12)
|
|
RC-Monster Stock
Offline
Posts: 47
Join Date: Nov 2011
Location: wa.
|
01.12.2012, 06:17 PM
thanks Kcz25 looks like I can run it with some shims (3mm) or small spacer or drill new hole still in the works
|
|
|
|
|
|
|
|
nylon washers 5/16 |
|
|
|
|
|
(#13)
|
|
RC-Monster Stock
Offline
Posts: 47
Join Date: Nov 2011
Location: wa.
|
nylon washers 5/16 -
04.16.2012, 04:30 PM
nylon washers 5/16 + 1 8mm shim
|
|
|
|
|
|
|
|
pics |
|
|
|
|
|
(#14)
|
|
RC-Monster Stock
Offline
Posts: 47
Join Date: Nov 2011
Location: wa.
|
pics -
04.16.2012, 04:40 PM
got the washers fror hardwear store
|
|
|
|
|
|
|
|
painted my cage and fixed some bad welds |
|
|
|
|
|
(#15)
|
|
RC-Monster Stock
Offline
Posts: 47
Join Date: Nov 2011
Location: wa.
|
painted my cage and fixed some bad welds -
05.24.2012, 11:55 AM
and put lst 2 axles on the back hard to see but it's an inch wider in the rear
|
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Linear Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
