Electric Revo Conversion

[mahazael]

I have been in the nitro arena for quite some time and I am intrigued by all this new electric stuff. So I nabbed a gorillamaxx electric conversion chassis.

Quite an ambitious project here, but I am looking for high speed and some nice run time to rival the old nitro version of my Revo.

So far I am thinking of

MGM Compro 160 amp, 24 cell brushless car controller
Neu 1515 1.5d/F Sensorless Brushless Motor
Apache 4s 14.8v 3700mah LiPo Battery Pack

I know the MGM will support up to 8S lipo's, but does it have to be 8s built into one pack, or can I do the old solder on extra leads to the controller and connect up 2 4s lipo's? I know the resistances will increase a bit between batteries and controller. But what else would this do.. if it can even be done at all?

Would it be best to just use a single 8s pack?

I am looking for uber speed from this thing and a decent run time.. at least 10 minutes.

Suggestions, comments or criticism (constructive please) would be appreciated.

-Mahazael

[Serum]

Hi Mahazael!

welcome to the forum.

You can't use the Neu 1.5d/F on 8S, it would run hot. Too hot, and too high in RPM. a better choice would be a Lehner motor (non high-amp), if you're planning on using it on 4 and 8S. The Lehner motors can be configured like a Y and a W wind, which results in a different KV value; lets say in standard configuration it runs 2200rpm/V; in a star configuration (which can be done with the use of a soldering iron) the motor is 2200/1.73=1271 rpm/V.

And yes, it is as easy as that. you can use all different kind of connections to make an 8S out of 2 4S packs. It doesn't need to be 1 8S pack.

With 4S and the Neu motor you can kick nitro's butt.

[HotnCold]

Originally Posted by Serum

With 4S and the Neu motor you can kick nitro's butt.

All day long and twice on Sundays -

[Serum]

I guess we now know the opening times of Barnstormers.. :p

[Dafni]

Sounds like a good time to visit the states!? :)


Sorry for the hijack, mahazael. And I agree with Serum: 4S can be plenty!

[Mike.L]

i would get some max amps 6000hv or 8000hv mah packs but still have em on 4s and 14.8V that would beat a nitro truck in run time and awsome power.