would this work with the mm 5700? - RC-Monster Forums

t-maxxracer32 · **would this work with the mm 5700? -** 02.19.2007, 11:09 PM

http://cgi.ebay.com/JAMMIN-X1-CRT-RT...em150093882586

thanks!

02.19.2007, 11:31 PM

Quote:

Originally Posted by t-maxxracer32

http://cgi.ebay.com/JAMMIN-X1-CRT-RT...em150093882586

thanks!

What do you mean?:032: Do you want to know if the MM 5700 will power the Jammin crt? If so, than the answer is no not really, the Jammin crt is a 1/8 scale truggy which would require an XL sized motor (or bigger). You could possibly use the MM esc only though. Sorry if this not the answer you were looking for!

Bye:018:

t-maxxracer32 · 02.19.2007, 11:34 PM

oo its 1/8.. thats what i was asking!!!

you answered it!!

thansk!

BP-Revo · 02.20.2007, 01:00 AM

You should get a CRT .5 and shove the MM in there...then it should be crazy fast.

t-maxxracer32 · 02.20.2007, 09:54 AM

i couldnt find the crt .5 on ebay.. might not be looking for the right thing or something but if someone could get me a link thatd be sweet!!

t-maxxracer32 · 02.20.2007, 09:56 AM

o lol... its a 1/18th scale.. i dont think i could have too muchfun with those... lol

anyone know of a nice 1/10 4wd stadium truck to make a project truck?

i really like the jammin trucks but do they have any small enough?

jollyjumper · 02.20.2007, 10:19 AM

you could do the hotbodies one.

t-maxxracer32 · 02.20.2007, 10:25 AM

which hotbodies one?

jollyjumper · 02.20.2007, 11:04 AM

this one: http://www.hbeurope.com/kit.php?partNo=66502&lang=en

sleebus.jones · 02.20.2007, 11:53 AM

The MM motor is a "S" can, which isn't quite enough for an 1/8th vehicle. "L" and "XL" work fine. I'm running a 10L on mine with no problem. I'm seriously considering a 7XL, I believe that AAngel runs one of those.

Sleeb

t-maxxracer32 · 02.20.2007, 12:35 PM

well i wouldnt mind buying a 7xl motor but wouldnt i have to use like 12 cells? or a 6s a123 cell setup? my mm esc wouldnt be able to handle that...

or could it?

glassdoctor · 02.20.2007, 12:43 PM

Quote:

Originally Posted by t-maxxracer32

well i wouldnt mind buying a 7xl motor but wouldnt i have to use like 12 cells? or a 6s a123 cell setup? my mm esc wouldnt be able to handle that...

12 cells and 6s A123s is very different voltage...

Yes, the MM can handle 12 cells, but you should use a little bec regulator to keep it cooler.

7Xl and 12 cells would be a good setup...

Actually the CRT .5 is going to be a pretty badass little truck. It's just a little smaller than a 1/10 buggy... uses buggy tires. They are supposed to be out by the end of the month.

crazyjr · 02.20.2007, 12:46 PM

according to tower mid to end of march

t-maxxracer32 · 02.20.2007, 12:55 PM

well id have to see the size.. idk...

aw... i couldnt use 6s a123 then huh... i thought 6s and 12 cells were the same lol... like 5 volts off.. haha

would that hot bideis be a nice truck?

my mm esc could not handle 6s could it?

squeeforever · 02.20.2007, 05:54 PM

The MM's have been proven up to 5S LiPo and 6S A123's. So..