Revo stuff, .18 TZ-TX & Conversion, 1/8 tank - going brushless

[gtxracer]

I don't have the time for nitro anymore, going to brushless. Less setup, less mess, more actual runtime for me. This setup has a ton of power and don't want to sell it, but I hardly have time to run it and need something more time efficient and practical. I would rather trade it but will sell too. I'll have updated pics soon with just the items. For now, here's shots of the Revo. You can email me at gstarwin@yahoo.com or PM me for prices

O.S. Engines .18 TZ-TX, rotary carb, 1/2 gallon through the engine including break in, O'Donnel 20% used the entire time. This engine has very little runtime on it, broke in the right way per OS manual (included) and I'll also include the original box. I've used after run oil in this engine after every run. The internals of this engine are CLEAN. They look new, as they should. I can get pics to prove this, it's really a spotless mill. Comes with a Mugen 1/8 scale air filter. I can include the Traxxas air filter too if the buyer wants. Also, I used to run a RRP flywheel and an MIP clutch until I went to the UE setup below. I can include either clutch setup for a little extra.


Unlimited Engineering (UE SuperMaxx) 4 shoe 1/8 scale clutch. I have just 2 tanks on this setup, still fresh with brand new Ofna springs. If you know you're UE stuff, you know that the UE clutch and Ofna clutches are practically the same with minor differences meant for monster trucks. These are the carbon shoes with the gold springs from Ofna. I'll include a clutch nut(whichever application you need), collet, the end screw, and some washers too. I have the clutch setup on the TZ above and it grabs VERY well. No pic yet, email me for it.

Ofna 1/8 scale fuel tank conversion. This is a mod I did before all the other tank conversions came out. It's a basic Ofna tank with their buggy tank mounts. I have a write-up I made and the link is below this description. Check out the link for pics and installation instructions. http://www.radiocontrolzone.com/showthread.php?t=203477


Fantom natural finish pipe with RB header. Good condition, used, but works great. I've always liked Fantom pipes and how they made my engines sound. The RB header flows well. If you want an HPI header (below) then I can include that one instead. Used this with the TZ and I liked it a lot. No pics yet. Email me for them.

HPI Header and stock Revo pipe (deanodized). You need this header to use a TZ in your Revo unless you want the high dollar RB mount. It's been modified for the TZ, has a small dent in it from when I had to bend it. I used this as my backup exhaust in case something happened to my Fantom/RB setup.

Now, onto what I'd like in trades:

Good Brushless ESC - Mamba Max, MGM, Lehner, BK Warrior, etc
Good Brushless motor - Neu, Feigao, Plettenberg, Lehner, etc
Note: I need a good ESC/motor to push my Revo. Please keep that in mind when asking for a trade.
Good LiPos and a good charger (Hyperion would be best)
NiMh batts (IB4200s are up please)