 |
|
|
|
|
|
 |
|
|
 |
Trinity NOW |
 |
|
 |
|
(#1)
|
|
RC-Monster Brushless
Offline
Posts: 2,077
Join Date: May 2007
Location: Australia
|
Trinity NOW -
05.11.2008, 05:18 AM
Anyone here got one or heard feedback on them? Look quite good and comes with mamba esc/motor & lipo battery to get up and going easy
 
MMM V1 w/1.20 Airtronics MX3 2.4Ghz TP 5S 5000mah Neu 2.5D/F |
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
Guest
Posts: n/a
|
05.11.2008, 10:03 AM
The Trinity Next is 1/16th nitro AFAIK. The Trinity NOW seems to be the same truck but electric powered.
Looks like fun to me, but I havn't seen one run yet. J. |
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
RC-Monster Brushless
Offline
Posts: 2,077
Join Date: May 2007
Location: Australia
|
05.11.2008, 06:21 PM
Yeah mean't NOW not the Nitro NEXT.
RC411/Xtreme RC did a review on it last issue and had no issues with it. Downside was Tamiya connectors and the price but $189.99 doesn't seem that bad MMM V1 w/1.20 Airtronics MX3 2.4Ghz TP 5S 5000mah Neu 2.5D/F |
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
Yip Yip Yip...
Offline
Posts: 1,489
Join Date: Aug 2007
Location: Australia
|
05.11.2008, 08:31 PM
I think rootar has one doesn't he?
Mini-T Pro: Micro Pro 6800kv, Lipo, HS-81mg, Dirt Hawgs M18MT: Quark 33A, Y22S 6000kv, FP 2s Lipo LRP S8-BX: RC-M Conversion, Tekin RX8 B1600KV, 6S. |
 |
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
RC-Monster Titanium
Offline
Posts: 1,803
Join Date: Aug 2005
Location: arkansas
|
05.12.2008, 06:44 AM
yea search for it on here, you should find my review and the thread on the chassis i made for it, ....in short the chassis is cheap chinese crap and MUST be replaced other than that and going over the whole truck a good check ( kinda like a rebuild but just checking) its really a solid little truck, i have broke one rear lower arm in the last 4 months, i have only driven it about 10 times total but the runtimes are extra long also.
you have a pm if your interested. |
|
|
|
|
|
|
|
|
|
|
|
|
(#6)
|
|
RC-Monster Brushless
Offline
Posts: 2,077
Join Date: May 2007
Location: Australia
|
05.12.2008, 06:46 AM
What makes the chassis so crap?
MMM V1 w/1.20 Airtronics MX3 2.4Ghz TP 5S 5000mah Neu 2.5D/F |
|
|
|
|
|
|
|
|
|
|
|
|
(#7)
|
|
RC-Monster Titanium
Offline
Posts: 1,803
Join Date: Aug 2005
Location: arkansas
|
05.13.2008, 12:24 AM
you can pick up the stock truck and bend it into any neat shape you want with very little effort, the gear mesh depends on the chassis on this truck and spur gears wont last 5 minutes a piece with the stocker. its bends VERY easy off even the smallest little bump or jump.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#8)
|
|
Check out my huge box!
Offline
Posts: 11,935
Join Date: Aug 2007
Location: Slidell, LA
|
05.13.2008, 01:01 AM
Sounds like it could do with a decent chassis brace, like some angle al run down the center, or a cf top deck with lots of standoffs. Do that before the chassis bends!
|
|
|
|
|
|
|
|
|
|
|
|
|
(#9)
|
|
RC-Monster Titanium
Offline
Posts: 1,803
Join Date: Aug 2005
Location: arkansas
|
05.13.2008, 06:01 AM
linc i dunno if i ever told yal but i did try the aluminum top deck with an angled center to end bracing and if didnt bend and stay bent but it did flex enough to eat spur gears, after the chassis i made i ended up switching back to no center bracing and using the fiberglass top deck and i still havent stripped a spur other than when i forgot to tighten a motor screw lol.
in all seriousness the only thing i can compared to how easy the chassis flexs and bends is prolly cardboard, seriously |
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
