RC-Monster Forums  

Go Back   RC-Monster Forums > RC-Monster Area > General Discussion

Reply
 
Thread Tools Rate Thread Display Modes
Regarding Speed Passion's thread in rctech and it's funny
Old
  (#1)
lutach
RC-Monster Dual Brushless
 
lutach's Avatar
 
Offline
Posts: 5,139
Join Date: Sep 2006
Regarding Speed Passion's thread in rctech and it's funny - 05.14.2008, 09:10 PM

Can those guys be serious. I went there asking about the Revolution-1 controller and all I get is crap. What is Schumacher doing? Why do they keep saying they work together with Speed Passion and you guys can clearly see now that all the GTs comes with Hobbywing written on the case. I made my point clear with that one. Who the hell are they trying to fool? Well if you go there you will see . Wilson who is the owner of King Golden has said the Revolution-1 will be out in November (He said it in Schumacher's own forum) as some members have said. Even a member called razzor has said it as well. Can some one go to www.speedpassion.net and see if the site is working. I keep getting a "Internet Explorer cannot display the webpage" and some of the guys in rctech (Mainly the Schumacher guys) say it's working. I thought RURC was bad, but wow the guys in that thread is killing me . The fun begins here: http://www.rctech.net/forum/showthre...200179&page=65

P.S.: Let me know if www.speedpassion.net is working .
  Send a message via MSN to lutach  
Reply With Quote
Old
  (#2)
TexasSP
Something, anything, nothing
 
TexasSP's Avatar
 
Offline
Posts: 2,747
Join Date: Mar 2006
Location: Houston, TX
05.14.2008, 09:28 PM

The website worked for me, but I don't use Explorer, I use Firefox.

This is why I stick mainly to this site, less idiots running off at the mouth!


www.cubicle101.com
A friends comic strip website.
   
Reply With Quote
Old
  (#3)
jhautz
RC-Monster Mod
 
jhautz's Avatar
 
Offline
Posts: 4,217
Join Date: Apr 2006
Location: Chicago, IL
05.14.2008, 09:32 PM

the site worked for me.

WHat the hell is wireless power? Are they transmitting lipo power thru radio waves now?


Edit: worked for me with IE


I can't decide if its more fun
to make it...
or break it...


Silent...But Deadly


   
Reply With Quote
Old
  (#4)
BrianG
RC-Monster Admin
 
BrianG's Avatar
 
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
05.14.2008, 09:33 PM

Site worked for me too. Using IE7...
  Send a message via Yahoo to BrianG Send a message via MSN to BrianG  
Reply With Quote
Old
  (#5)
lutach
RC-Monster Dual Brushless
 
lutach's Avatar
 
Offline
Posts: 5,139
Join Date: Sep 2006
05.14.2008, 09:45 PM

Funny, I'm using IE7 as well and the site is not working for me. Brian is it possible to bloc someones IP address so they can't see the site? The strange thing is that all 4 of my PCs didn't open the site.
  Send a message via MSN to lutach  
Reply With Quote
Old
  (#6)
lutach
RC-Monster Dual Brushless
 
lutach's Avatar
 
Offline
Posts: 5,139
Join Date: Sep 2006
05.14.2008, 09:49 PM

Quote:
Originally Posted by TexasSP View Post
This is why I stick mainly to this site, less idiots running off at the mouth!
I don't need to prove to them anymore that the GTs are made by Hobbywing. Actually Hobbywing was pissed to here that SP was saying (Or should I say Schumacher) that they were the manufacturer. So there you have it, now the new SP controllers comes with Hobbywing written on them . I don't know how many times the Schumacher guys will keep making stuff up and that was the only reason I started bashing them. Now I asked them about a Speed Passion controller and some of the guys think I'm even hijacking the thread. The thread is for "Speed Passion Brushless Answers Thread", but I can't get a straight answer from them.
  Send a message via MSN to lutach  
Reply With Quote
Old
  (#7)
aqwut
Brushless Heavy Weight....
 
aqwut's Avatar
 
Offline
Posts: 1,954
Join Date: Sep 2005
Location: Kingsville, Ontario
05.14.2008, 09:50 PM

Quote:
Originally Posted by lutach View Post
Funny, I'm using IE7 as well and the site is not working for me. Brian is it possible to bloc someones IP address so they can't see the site? The strange thing is that all 4 of my PCs didn't open the site.
you been blocked.. LOL...


The Power of BRUSHLESS!!!!!
http://www.geocities.com/aqwut
1HP (electric) = 746 Watts.
Everything is brushless!!
   
Reply With Quote
Old
  (#8)
lutach
RC-Monster Dual Brushless
 
lutach's Avatar
 
Offline
Posts: 5,139
Join Date: Sep 2006
05.14.2008, 09:52 PM

Quote:
Originally Posted by jhautz View Post
the site worked for me.

WHat the hell is wireless power? Are they transmitting lipo power thru radio waves now?


Edit: worked for me with IE
Try and ask those guys that and see what answer they give you . I asked a question about one of Speed Passion's product that I just thought was amazing and boy they are now chopping my head off. Schumacher just went too deep with all the made up story and now they seem to be stuck there and can't back out now and if they do it will make them look bad. I just hope Speed Passion doesn't come out with something new and someone asks a question in that thread .
  Send a message via MSN to lutach  
Reply With Quote
Old
  (#9)
lutach
RC-Monster Dual Brushless
 
lutach's Avatar
 
Offline
Posts: 5,139
Join Date: Sep 2006
05.14.2008, 09:53 PM

Quote:
Originally Posted by aqwut View Post
you been blocked.. LOL...
They can do that for real ? Wow, I should change my IP address then. Can some one tell me how to do that ?
  Send a message via MSN to lutach  
Reply With Quote
Old
  (#10)
MTBikerTim
Yip Yip Yip...
 
MTBikerTim's Avatar
 
Offline
Posts: 1,489
Join Date: Aug 2007
Location: Australia
05.14.2008, 09:55 PM

Quote:
Originally Posted by jhautz View Post
the site worked for me.

WHat the hell is wireless power? Are they transmitting lipo power thru radio waves now?


Edit: worked for me with IE
Wireless power. I think if someone invented wireless power transfer it would be used for a lot of far more common massive profit markets before it was used in RC. I can only think that it is something far less revolutionary then what they are trying to make out or more likely april stupid fools.


Savage: FLM Conversion, 6s, MMM, CC 1520.
Mini-T Pro: Micro Pro 6800kv, Lipo, HS-81mg, Dirt Hawgs
M18MT: Quark 33A, Y22S 6000kv, FP 2s Lipo
LRP S8-BX: RC-M Conversion, Tekin RX8 B1600KV, 6S.
  Send a message via MSN to MTBikerTim  
Reply With Quote
Old
  (#11)
lutach
RC-Monster Dual Brushless
 
lutach's Avatar
 
Offline
Posts: 5,139
Join Date: Sep 2006
05.14.2008, 09:57 PM

I remember someone posting a website that allowed you to hide your IP to actually view something. I think it was when we were having the Max Amps thing and John got kicked out of Nitrokillers. Now where is that post?

Edit: I found it www.ghostmyip.com

Last edited by lutach; 05.14.2008 at 10:00 PM.
  Send a message via MSN to lutach  
Reply With Quote
Old
  (#12)
lutach
RC-Monster Dual Brushless
 
lutach's Avatar
 
Offline
Posts: 5,139
Join Date: Sep 2006
05.14.2008, 10:07 PM

Ok it worked and all I see is the crawler stuff and the wireless power bs thing. The other photos don't open though.
  Send a message via MSN to lutach  
Reply With Quote
Old
  (#13)
BlackedOutREVO
Guest
 
Posts: n/a
05.14.2008, 10:57 PM

LOL, they blocked your IP

Thats why I dont have a SP GT because there fan boys are stupid, Adam is a nice guy, but just stupid
   
Reply With Quote
Old
  (#14)
johnrobholmes
RC-Monster Aluminum
 
johnrobholmes's Avatar
 
Offline
Posts: 905
Join Date: Aug 2007
05.14.2008, 11:05 PM

They make a crawler inrunner that is sensored, then they make it 1000kv. The only reason that 1000kv stuck was because it was what the 55t lathe motor is, and that most of the dLRK 300 and 400 class outrunners hover from 850-1200KV. 1500 to 3000kv is more useful for crawlers IMO, they have a sensor and it is a waste of motor to have it so slow (weak @ 7.2v). That motor could be ran on 35v I bet.


---JRH---
   
Reply With Quote
Old
  (#15)
lutach
RC-Monster Dual Brushless
 
lutach's Avatar
 
Offline
Posts: 5,139
Join Date: Sep 2006
05.14.2008, 11:11 PM

Quote:
Originally Posted by johnrobholmes View Post
They make a crawler inrunner that is sensored, then they make it 1000kv. The only reason that 1000kv stuck was because it was what the 55t lathe motor is, and that most of the dLRK 300 and 400 class outrunners hover from 850-1200KV. 1500 to 3000kv is more useful for crawlers IMO, they have a sensor and it is a waste of motor to have it so slow (weak @ 7.2v). That motor could be ran on 35v I bet.
I asked Feigao for a sample of the 1100Kv motor and I was actually planning on running it with 36-44.4 volts. Should be an extremely efficient set up. BTW John, do you have the low Kv Feigao?
  Send a message via MSN to lutach  
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com