a little bit of my e-revo,

just put a 3,3 chassis on there and this pleazer!

a few more

[img=http://img151.imageshack.us/img151/9896/picture021yt9.th.jpg]

[img=http://img151.imageshack.us/img151/9896/picture021yt9.th.jpg]

hope you guys like!

just got a spektrum coming my way for this, i get a little glitching even w/ a rx pack, hopefully 2.4 ghz will take care of it!

that is a fiegao 7xl(switching to 8 soon) with two true rc 2s2p 8000 15c"s thing hauls, got the trans locked in second, gearing 24/58, non-stop wheelies lol

[thetick]

Did you do the "pin" mod in the tranny?

ya did that when i had it apart, used an allen wrench

well i had a little to much fun at the track and didnt relize the mud i was running in, well the thing was a mess, so i ripped it apart and redid my config a bit, shoulda got some pics of the body! heres what i got it down to well sort off, started putting it back bu whatever





some pics of how nasty it was!




then how it sits now








thats a 1515 1y geared 26/58, thing runs ice cold on true rc 2s 8000's need a little more gear~!

amazing how far and neat this has became, barely any wires hangin around, thing runs sweet at the track!

[DRIFT_BUGGY]

Looking great, did you paint that yourself?

greg thats the 3906 tranny correct? what pinion and spur do you use?

and can you give me a linc to the fan you used on the mm

drift, thats man, and no unfortunitly i cant paint like that, and bust yea its a 3906 tranny, i got a spur from my hobby stop that worked with that slipper, its a 58t, i got the pinion from mike, a 26t. planning on opening it up to put a revo slipper in there

oh and just search 25mm fan on ebay i got em from a place called the fan van or something like 4 bucks a piece

Originally Posted by big greg

drift, thats man, and no unfortunitly i cant paint like that, and bust yea its a 3906 tranny, i got a spur from my hobby stop that worked with that slipper, its a 58t, i got the pinion from mike, a 26t. planning on opening it up to put a revo slipper in there

Greg I will be watching this thread because I have pretty much identical trany and chassis set up and I want to make my tranny and slipper more bullet proof...you helped me big time on my longer center drive shaft problem...keep up the good work

yea i just crank the slipper all the way down, no need for it to slip for me, if i want that ill just tone down the mamba. but thanks about the help. did you get yours going?

Originally Posted by big greg

yea i just crank the slipper all the way down, no need for it to slip for me, if i want that ill just tone down the mamba. but thanks about the help. did you get yours going?

I had a few delays.....will have pics posted soon

right now I'm running twin velinions but I have a feigao 8xl and heatsink on the way to try that with mm and bec

i'm in the second batch order here on RCM for the MMM and will be waiting for the MMM motor or might get the tekno neu