flm bulks

what 1/8 diffs can be used in the flm blukheads? i know the hyper 7 diffs will work but are there any others? thanks

[squeeforever]

i think thats the only ones.

[MetalMan]

I think I heard that Kyosho 1/8 diffs work too.

[Serum]

The UE's can be used too, (both the 6 and the 8 gear types) which is great, because they come with the pinion and the 4 bearings needed. and they have got tough cups!..You can't use savage diffs, the ringgear is too large.

ok thanks

[coolhandcountry]

I didn't think the ue diffs would work with the cups. I may be wrong. I was going to get them. Mike said the cups had to be changed out. Make sure with mike before hand. Serum may have tried this. Not trying to tell you different.

[Serum]

I use them with UE diffs, with the UE cups,

Here is what's been going on with those FLM's;

The older types didn't fit the UE cups, but the new types are a 1:1 fit.

If you have got the older types, you can sent them to FLM and they can machine them to the appropriate size..

[coolhandcountry]

OKay! That would explain some things. I didn't want no one to buy them and not work. Thanks serum!

[RC-Monster Mike]

Serum is 100% correct. The current hybrids bulks from FLM will fit most 1/8 buggy diffs as well as the UE diffs.