A small afternoon project...

[lincpimp]

No the title is not misleading, I actually did this in an hour, so it is a small project for me!

Recently bought a few new chargers, so I decided to make a portable charging station for my buddies and I when we go rock crawling. Most of us use 1800-2100 3s lipos, or 4000 2s lipos. I had the case, it is for a jigsaw. Just cut out most of the dividers, and trimmed some high desity foam for the chargers. The power supply fits perfectly height wise, and I added some foam above the chargers on the inside of the lid to keep them in place during transport. The little space on the right side is for balancers and adapter harnesses, and on the right I have the cord for the power supply, and a long harness to use with a 12v battery in a car (has alligator clips on the end). Both chargers are wired together, but i can unplg one if I want to. All connections are 4mm bullets.

I will have to rebuild my charge station (some of you will remember that), as I now have 2 MRC 989, 2 ICE, and 2 other Hyperion 5i chargers.