1/5 MCD E-MT "Finished" - RC-Monster Forums

Takedown · **1/5 MCD E-MT "Finished" -** 01.14.2009, 06:26 PM

Ok guys here it is! After 4 months of hard planning, modding and buying I finally got this bad boy running. It runs great over all but still needs a voltage upperage. Here is my current Setup and my future Setup...

Current....

ESC- AstroFlight 75a 60v
Motor- CIM Large Robotics Motor 440kv
Battery's- 18v 4000mah nimh's.
Powered by- Chain, sprokets and gears...

Future...

ESC- 48v Victor HV ESC
Motor- No changes...
Battery's- 10-12s 4000-6000mah lipos with atleast 25c's.

Also the big joes are lasting very well on the 1/5. I picked up some 1/5 foams and modded them to fit inside the big joes and it really helps the tires from flattening while sitting. Anyways without further adue, here are some pics.

pedeboi364 · 01.14.2009, 06:28 PM

sweet looking ride. I would check out going A123 on that truck...

Takedown · 01.14.2009, 06:32 PM

Possibly. I was thinking about picking up 1 or 2 of those 36v dewalt packs on ebay with the a123 cells.

pedeboi364 · 01.14.2009, 06:35 PM

oooo, or, how about solar power? i know nothing about that, just an idea :)

dirt101 · 01.14.2009, 06:35 PM

Quote:

ESC- AstroFlight 75a 60v

just wondering, why does it say 50a on your esc? JK

Looks like alot of fun though!

Takedown · 01.14.2009, 06:35 PM

It says 50a. But is capable of 75a cont.

pedeboi364 · 01.14.2009, 06:47 PM

wow, maybe stick a mini sub in there and do a scale project? that would be cool too...

dirt101 · 01.14.2009, 06:53 PM

I got a 75w RMS 135w peak 6.5" you can have! that would be a sweat 1/5 scale. You could be plowing the snow and bumpin at the same time.

pedeboi364 · 01.14.2009, 07:01 PM

and who doesn't love to bump in the snow?!?!?! lol, couldn't resist.

Metallover · 07:03 PM

I see no pics of batteries?

edit -ahh wait... Are those drill batts your source of power? I thought you were going with pb's...

JERRY2KONE · **Nice toy. -** 01.14.2009, 07:08 PM

Nice toy Takedown, it looks like fun. You really need to shrinkwrap those batteries before they come apart on you, and what in the hell is that plow thingy on the front end for? That motor looks to be pretty heavy duty. Put some large voltage and a big ESC in there and you will have a real screemer on your hands. Have fun and drive safe.

TDC57 · **Outstanding job Takedown… -** 01.14.2009, 07:54 PM

Wow what a great build!..

My questions for you ??

• How mush does it weigh now ?
• How fast are you going ?
• What type of runtimes are you getting out of that bad boy ?

Other mics comments..
It’s just way cool… Great job.. you must post video when you able..

Have a great one sir and thanks for sharing..

P.S.
I would think about moving this thread to the Project “X” section..

Takedown · 01.14.2009, 09:52 PM

Quote:

Originally Posted by Metallover

I see no pics of batteries?

edit -ahh wait... Are those drill batts your source of power? I thought you were going with pb's...

I plan on running that 18v pack until I save for a nice pair of two 5s's or 6s's.

rabosi · 01.14.2009, 09:52 PM

Very nice indeed. I too am curious about the "plow thingy".

Takedown · 01.14.2009, 09:55 PM

Quote:

Originally Posted by TDC57

Wow what a great build!..

My questions for you ??

• How mush does it weigh now ?
• How fast are you going ?
• What type of runtimes are you getting out of that bad boy ?

Other mics comments..
It’s just way cool… Great job.. you must post video when you able..

Have a great one sir and thanks for sharing..

P.S.
I would think about moving this thread to the Project “X” section..

Haha thanks TDC!

It weighs 23.6lbs loaded with this setup. I am hitting around 30ish which isnt special but its good for now. I really want to upgrade to lipo soon.

I dont think I should repost this thread though. Mike/Brian might not be to happy with that decision.