is this an X or a 25?

[whitrzac]

a guy wants to trade my slash for this, it has the X TVPs and body but I want to know for sure that its not a 25...

what exactly is the difference? Those are 25 tires....... Plus it has an aftermarket engine. Isn't the X a .25? but if the guy claims it's an X, and it has the TVPs, and the engine is upgraded, i don't see why not.

[tonkabilly]

I could be completely wrong but I think it has both x and 25 parts. The lower a-arms dont have two shock mount positions on the x version. Hard to tell by the pics but does the radio box lid connect by pins or does it have the twist connector on the back of it and no pins.
Personally it does not matter that much. The x version just has some creature comforts for uninstalling parts.

Just took a closer look at the pics. That is a 25 version with x tvp's.

[whitrzac]

Originally Posted by tonkabilly

I could be completely wrong but I think it has both x and 25 parts. The lower a-arms dont have two shock mount positions on the x version. Hard to tell by the pics but does the radio box lid connect by pins or does it have the twist connector on the back of it and no pins.
Personally it does not matter that much. The x version just has some creature comforts for uninstalling parts.

Just took a closer look at the pics. That is a 25 version with x tvp's.

ok, I was more after the alloy diffs out of the X than anything else...

I think stormer still has the 25 to X conversion...

[lincpimp]

Bulks look like 25 bulks to me. Might also have the 2 spider diffs... So figure you have to upgrade the diffs...

[whitrzac]

seller got back to me, its a 25 with the X plates...

is it worth $135??

[lincpimp]

Does it come with the motor, and radio gear/servos? If so then it is definitely worth 135...

[tonkabilly]

Ya, I would have to agree. If the engine and electronics are included that pretty much pays for your costs.

[whitrzac]

he says the front pinion is shot. he said thats it, but he didn't mention the missing fuel tank.... and its a USED nitro motor...

definitely worth 135 imo..just make sure engine is running ..

[tonkabilly]

even if the engine is no good, I can hook you up with one.

[Metallover]

I think the x has a steel spur so it has to be a 25.

[BL_RV0]

The X has a plastic spur. At least the 4.1 does, not sure about the 4.6

[whitrzac]

I had to pass on this one... for one, I hate nitro so it would take alot of $$ to convert it to elc, and 2, I have no $$ :(

Could have sold the nitro engine. Basically got a dirt cheap roller.