 |
|
|
|
|
|
 |
 |
Slaxial |
 |
|
 |
|
(#1)
|
|
RC-Monster Mod
Offline
Posts: 6,597
Join Date: Apr 2007
Location: NJ
|
Slaxial -
04.23.2011, 05:58 PM
Almost finished... Thanks for all the tube work John...
Custom tube frame care of JMZ6! Slash 4X4 front end Summit Trans Axial Rear 3S Lipo Tekin 13.5T MM Pro & CC Bec 5955TG Baja Lights RC4WD Baja Claws on Losi 1.9 Alum Wheels To go: - Rear tire carrier - Mud guards       
|
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
Soldermaster Extraordinaire
Offline
Posts: 4,529
Join Date: Apr 2007
Location: Plymouth, MA, USA
|
04.23.2011, 10:23 PM
Nice work, as always. :) I've got to do something cool with my Slash...
+1 for the duct tape LiPo... 
|
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
RC-Monster Aluminum
Offline
Posts: 738
Join Date: Oct 2010
Location: Williston, ND
|
04.23.2011, 10:38 PM
sweet! Can't wait to see it running....hint hint
|
  |
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
RC-Monster Aluminum
Offline
Posts: 998
Join Date: Oct 2007
Location: Colorado
|
04.24.2011, 12:22 AM
Directional tires on mixed up will give you some weird handling...
Otherwise looks very well thought out and executed :-) |
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
RC-Monster Dual Brushless
Offline
Posts: 4,236
Join Date: Dec 2007
Location: Cape Cod, Mass.
|
04.24.2011, 10:10 AM
Sexy! Well done as always Chris
2. MBX-5T 1520, MMM ON 5S 3. MBX-5 ONROAD CONVERSION 1515, MMM ON 5S 4. MRX-3 ON ROAD CONVERSION 1512, MMM ON 6S 5. TEN T 2650 T8, MMP ON 3S |
|
|
|
|
|
|
|
|
|
|
|
|
(#6)
|
|
RC-Monster Mod
Offline
Posts: 6,597
Join Date: Apr 2007
Location: NJ
|
04.24.2011, 08:02 PM
Done for now... Would be nice to find a single RCW4D Baja Tire
  
|
|
|
|
|
|
|
|
|
|
|
|
|
(#7)
|
|
Soldermaster Extraordinaire
Offline
Posts: 4,529
Join Date: Apr 2007
Location: Plymouth, MA, USA
|
04.24.2011, 10:19 PM
Hey, Flat Irons are good tires, too!
Remember- function before form. 
|
|
|
|
|
|
|
|
|
|
|
|
|
(#8)
|
|
|
RC-Monster Mod
Offline
Posts: 6,597
Join Date: Apr 2007
Location: NJ
|
04.24.2011, 10:30 PM
Quote:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(#9)
|
|
RC-Monster Aluminum
Offline
Posts: 897
Join Date: Mar 2010
Location: Same town as "Brand P"
|
04.25.2011, 12:58 AM
Very nice! Would love to see some nude pics of it. So are the front and rear ratios exactly the same or just close enough? What are your plans for it...function wise? Or was it just a boredom build?
|
|
|
|
|
|
|
|
|
|
|
|
|
(#10)
|
|
|
RC-Monster Mod
Offline
Posts: 6,597
Join Date: Apr 2007
Location: NJ
|
04.25.2011, 12:16 PM
Quote:
Started with a bunch of slash 4x4 parts from when I upgraded mine to RPM stuff... Scanned ebay for ages looking for a summit transmission and finally scored one for $40... Started throwing it together and everything came together so far pretty easily. The trans mount is a piece of 1/8 CF mounted to the chassis on some delrin blocks. I managed to hack together the front driveshaft from a couple of revo outer CVD cups and a dog bone I had lying around. The rear cost more than I'd hoped with a Mip setup. Its setup to run 2X 3s Maxamps 2000mah as saddle packs either side of the transmission left over from my LCC and wouldn't sell. Motor is a 13.5T/mmpro with the 14mm rotor left over from the RCDriver Rock Racer project last year. Shocks will see how it turns out but threw on some Integy 3.5" for the front and 4" on the rear from the spares bin.     
|
|
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Linear Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
